|
|
Currently only for the Harley-Davidson
touring models in three heights for standard suspensions, lowered rear
suspension and lowered front and rear suspensions..
* Click here for fitment
information *
|
|
| Limited lifetime warranty.
Click
For Warranty Details
|
|
|
Mounts to the frame with two bolts in less than five minutes with a 3/4
inch wrench.
|
|
|
EZ-OFF by simply placing the bike in gear and driving off.
Because the rear tire is not completely off the ground the bike can be driven
off of this stand.
|
|
|
This EZ-UP stand allows the rider to easily place the bike on the stand
while still on the bike.
|
|
|
Your tank will hold up to ½ gallon more fuel when parked in the upright
position.
|
|
| No frame or bike modification required.
|
|
| By placing a 3/8 inch spacer (such as a
piece of plywood) below the stand you will have the rear wheel free of
the ground for free rotation and cleaning.
|
|
| The load carrying points are only on the
bottom of the frame rails.
|
|
| Maintenance free stand with I-Glide self
lubricating bushings at the pivot locations
|
|
| Zinc plated axle
|
|
| Stainless steel springs
|
|
|
Powder coated to match the frame
|
|
| Made in the U.S.A.
|
|
| Patent Pending.
|
|
| All Wheeldock models are in stock, and are shipped UPS Ground. For other shipping options, please call us at (405) 743-8080. Shipping options up to Next-Day Air are available.
|
|
| Shipping Weight: 8 pounds.
|
|
| Click For Owners Manual
|
|
| Note: If your bike has Kuryakyn adjustable
passenger pegs part #7926, with the extended passenger board mount part
#4537 which moves the left side foot board out in order to clear the
Rinehart true dual exhaust systems you will need to call us as we make a
special version for this setup with the foot lever on the right hand
side. We build these in any height needed. Cost is still the same but it
will add a few days for shipment.
|
|
| Lowered Bikes -
to determine if your bike has a lowered suspension measure the
center-to-center dimension of the rear shock absorber mounting bolts.
Stock height is 12¾ inches between centers and lowered shocks are 11¾
inches between centers.
Also see our Fitment Guide page
here |
