|
HOW DO I FIND
THE CORRECT SIZE
EZ-UP CENTER STAND FOR MY BIKE?
Note: The following sizing
information is for bikes with stock wheel/tire
combinations only.
If custom wheels of a larger diameter are used give
us a call for proper fitment.
2009 &
Later
MODELS
1989 to
2008 MODELS
-
Model #CS-1-C Center Stand for STOCK Suspensions -
Standard Height Model (With Chrome Foot Lever)
This model EZ-UP Center stand fits the
standard height
suspensions on 1989-2008 Harley-Davidson touring motorcycles. This
is the center stand needed for all FL touring bikes which have the
bowtie brace welded between the frame rails directly below the
transmission.
*
The length of standard height rear
shocks are 12-3/4 inches. Measure the mounting bolts from
center-to-center to check this dimension.
Click
Here to Buy This Model Online
-
Model #CS-2-C Center Stand for LOWERED Suspensions
REAR ONLY (With Chrome Foot Lever)
This model EZ-UP Center stand is for H-D touring motorcycles,
(1989-2008) which are
lowered in the REAR only. This model is ¾ inch lower than the stock
center stand and fits the factory-lowered models like the FLHX Street
Glides and FLHRS Road King Customs, and any bike that has been lowered
with the H-D Profile REAR
suspension lowering kits.
*
The length of lowered rear shocks are 11-3/4 inches. Measure the
mounting bolts from center-to-center to check this dimension.
Click
Here to Buy This Model Online
-
Model #CS-3-C Center Stand for LOWERED Suspensions
FRONT & REAR (With Chrome Foot Lever)
This model EZ-UP Center stand is for Harley-Davidson touring motorcycles,
(1989-2008) which have been lowered in the FRONT and REAR. This model is 1 inch
lower than the stock center stand and fits the factory lowered FLHX
Street Glides the FLHRS Road King Customs, and any touring model that
has been lowered with the H-D Profile
FRONT and REAR suspension
lowering kits.
Click
Here To Buy This Model Online
|
