Measurement Guide

Most of our products are specifically designed to fit certain makes/models. If you can't find your bike on our list of available product versions, we can still create one for you in most cases, but may need some specific measurements. 

Below are some simple steps to ensure we get accurate measurements for your bike.

Tire Width

1. Use a clamp and tighten it until it first touches both sides of the wheel.

2. Use a measuring tape to measure the inside of the left side of the clamp to the inside of the right. 

Front Suspension

2017 to Present = 18-1/4” Standard Height

2017 to Present = 17-1/2” HD Lowering Kit

2009 thru 2016 = 18-5/8” Standard Height
2009 thru 2016 = 17-7/8” HD Lowering Kit

2008 & Earlier = 19-1/2” – 19-7/8” Standard Height

Rear Suspension

Measure from the center line of the top shock mounting bolt to the center line of the lower shock mounting bolt.

12-3/4" is the standard HD shock length.  11-3/4" is the lowered HD shock length.

Lowering Blocks - Measure from the center line of the top shock mounting bolt to the center line of the ORIGINAL lower shock mounting bolt on the swing arm.

The equivalent dimension for Harley Low Profile shock is 11-3/4".